Panasonic beamer projektor pt ae4000e Kézikönyv

PDF Kézikönyvek
36 Oldalak Angol

Panasonic beamer projektor pt ae4000e
E
NGLISH - 25
Maintenance
TEMP and LAMP Indicators
Managing the indicated problems
If a problem should occur with the projector, the LAMP and/or TEMP
indicators will inform you. Manage the indicated problems as follows.
Conrm the status of all indicators and projector, and switch off 1.
the projector in proper way.
Find out the cause of the problem by status of the 2. LAMP and/
or TEMP indicators.
Follow the following instruction for each indication and solve 3.
the problem.
Turn on the projector in the correct way and conrm the 4.
indicator is not indicating a problem any longer.
Power LAMP TEMP
J
TEMP indicator
Indicator
Illuminating red while projecting and the alert will be displayed.
Flashing red and the power button is turned off automatically.
When the
TEMP indicator is lit, the lamp might have darkened.
Adjustments can be performed but not all changes will be shown on the image.
Problem
The temperature inside and/or outside the projector is abnormally high.
Cause
The air intake and exhaust
ports are covered.
The room temperature is
too high.
The air lter is excessively
dirty and the ventilation is
poor.
The projector is located
at high elevations (above
1 400 - 2 700 m).
Remedy
Remove the object(s)
from the ventilation
openings or clear around
the projector.
Reinstall the projector in
a temperature controlled
place. See page 32.
Clean or replace the air
lter in the proper method.
See page 26.
Turn on the projector and
set the HIGH ALTITUDE
MODE to ON.
See “INSTALLATION” of
the functional instructions
that is in the provided CD-
ROM.
J
LAMP indicator
Indicator
Illuminating red Flashing red
Problem
LAMP RUNTIME has
reached 1 800 hours.
Lamp circuit failure, abnormal function or lamp unit is damaged.
Cause
The lamp unit will run out
soon and needs to be
replaced.
The power is turned on
again before the lamp unit
is cooled enough.
Lamp circuit failure,
abnormal function.
The lamp unit is damaged.
Remedy
See “Replacing the lamp
unit” on page 27.
Let the lamp unit cool
down and turn on the
power after 90 seconds.
Contact an Authorised
Service Centre.
See “Replacing the lamp
unit” on page 27.
NOTE:
If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorised Service Centre. •
Maintenance
Tartalomjegyzék
Mindet kibont
Kapcsolódó Kézikönyvek a Panasonic beamer projektor pt ae4000e
pt d5500e
Panasonic beamer projektor pt d5500e

Számára beamer projektor (60 Oldalak)
PT-FX400EA
Panasonic beamer projektor PT-FX400EA

Számára beamer projektor (46 Oldalak)
PT-DW17K2
Panasonic beamer projektor PT-DW17K2

Számára beamer projektor (223 Oldalak)
PT-DZ870E
Panasonic beamer projektor PT-DZ870E

Számára beamer projektor (195 Oldalak)
pt fw300nte
Panasonic beamer projektor pt fw300nte

Számára beamer projektor (66 Oldalak)
pt ae1000e
Panasonic beamer projektor pt ae1000e

Számára beamer projektor (16 Oldalak)
PT-V W330U
Panasonic beamer projektor PT-V W330U

Számára beamer projektor (26 Oldalak)
PT-LX26HE
Panasonic beamer projektor PT-LX26HE

Számára beamer projektor (76 Oldalak)
PT-DS12KE
Panasonic beamer projektor PT-DS12KE

Számára beamer projektor (187 Oldalak)
PT-FW430E
Panasonic beamer projektor PT-FW430E

Számára beamer projektor (87 Oldalak)
PT-V W330EA
Panasonic beamer projektor PT-V W330EA

Számára beamer projektor (82 Oldalak)
PT-TW231RE
Panasonic beamer projektor PT-TW231RE

Számára beamer projektor (79 Oldalak)
pt lb80nte
Panasonic beamer projektor pt lb80nte

Számára beamer projektor (55 Oldalak)
PT-RW630
Panasonic beamer projektor PT-RW630

Számára beamer projektor (185 Oldalak)
PT-DZ870U
Panasonic beamer projektor PT-DZ870U

Számára beamer projektor (190 Oldalak)