Felhasználói Kézikönyv Tfa Hőmérő 30.2011 [1/2 Oldalak]

TFA hőmérő 30.2011

Instructions for the use of the 30.2011

This digital thermometer is an eIectronic precision instrument for the measurement of internal and external

temperatures specially adapted for installation in motor vehicles. The instrument also warns of ground frost,

has an illuminated display if connected to a 12V system and shows the time.

Measurement range Internal: 0°C I + 499°C External: -40°C I + 80°C

(32°F1+122°F) (-40°F1+178°F)

Scalale: 0.5°C (0.5°F) Battery: 1.5 V button cell

Max. Error: 1°C (18°F) Cable length: approx 3 m

Caution: used batteries should be disposed of separately

Installation

1. Find a suitable space visible from the driving seat where the thermometer can be installed either with it's

adjustable holder or using the enclosed Velcro fastening. Ideally, this should be close to a cable bushing

and it you want to connect the thermometer to the vehicle electric system there must be a connection

availabe (see 4.2)

2. Lead the external sensor through a cable bushing (e.g. the radio antenna bushing) and through the

engine space to the front bumpar. Attach the self-adhesive sensor to the rear of the front bumper in a

protected position that you have first cleaned thoroughly of all dirt, rust and grease. Secure the wire in

the engine space to the wall or another cable with clamps or insulating tape to prevent it dangling free.

3. Before using the thermometer check proper, secure and safe siting of the external sensor wire in the

battery/cable plug receptacle of the thermometer

4. Connect to currents as following:

4.1 Operation with enclosed round cell

Insert battery in battery/cable plug receptacle and close cover. Make sure the cable to the external

sensor is properly sited and connected.

4.2 Operation on 12V circuit (vehicle battery)

a. Remove the round celI from the battery receptacle

b. Attach the enclosed wiring connector to the 3-pole 12V connection in the battery plug

receptacle

c. Crimp the enclosed cable lugs on the uninsulated cable ends

d. Connect red cable to vehicIe bettery (KL 30)

e. Connect grey cable to 12V light connection (KL58)

kezikonyvekocean.hu

Információ

Tfa hőmérő 30.5005

Tfa hőmérő 30.1011

Tfa hőmérő 30.1008

Tfa hőmérő 30.5021

Tfa hőmérő 30.5007

Tfa hőmérő 30.1044

Tfa hőmérő 30.1049

Tfa hőmérő 30.1056.02

Tfa hőmérő 30.1054

Tfa hőmérő 30.5022 KlimaLogg Base

Tfa hőmérő 14.1503

Tfa hőmérő 30.3043 - Pure

Tfa hőmérő 30.1040

Tfa hőmérő 30.1017

Tfa hőmérő 30.5033

kezikonyvekocean.hu

Információ