Snooper különféle RC200 Kézikönyv

PDF Kézikönyvek
1 Oldalak Angol

Snooper különféle RC200
Oldalak
A
1
Professional Safety Video System
For
Vehicle
Auto Shutter Camera System
Owner's Manual
Two Cameras Input Control Box
Power on without trigger
1. Press “POWER” button on keyboard or CAM Select/ button on monitor
to power up the system, you can select CA1, CA2 or AUX via keyboard
or “CAM Select/ ” button on monitor.
2. Press “POWER” button on keyboard or CAM Select/ ” button on monitor
longer than 2 seconds to power off the system, then power up, last memory
image will be displayed.
3. Auto-scanning between two cameras can be realized by pressing CA1 or CA2
button more than 2 seconds. Press CA1 or CA2 lightly to cancel scanning.
Power on with trigger
Once trigger, triggered camera's image will be displayed on monitor. You
can use keyboard or CAM Select/ button to select CAM1, CAM2's
image.When you cancel trigger, will go back to the last memory situation.
Two cameras input control box
Two cameras input
CAM1 is always in highest priority
Individual automatic triggering for two cameras
Extra video input and output function
Extra DC12 – 24V/1A Power in and Power out plug
Mirror/Normal image setting switch available in individual camera
Keyboard can select two cameras and AUX freely
Automatically select and display the rear image when vehicle is in Reverse
Reverse voltage protection and Overload protection
With Auto-time button, you can adjust scan time between CAM1 and CAM2
from 2 ~ 20 seconds
Function
Specification
Auto- Shutter Camera
Image Type: Color SONY CCD
Resolution: PAL 500( H) *582( V)
NTSC 510( H) *492(V)
Image Size: 1/ 4 inch
Lens: 2.6mm, F2. 0
Lens angle: 110°( diagonal)
Synchronization: Internal
Horizontal Resolution: 420 TV Line
Waterproof grade: IP68,Salt-Mist Test approval
Signal to Noise Ratio: 48dB
Power Supply: DC12V±10
Power Consumption: 1. 5W
Operating Temperature Range: - 30to + 65
Storage Temperature Range: -40to +85
Dimension: 105* 65* 93mm
Weight Approx: 588g
Control Box( Two- camera input)
Power Supply: 12- 24V DC
Power Consumption: 9W- 18W
Dimension: 157( L) *76(W)* 34( D) mm
Weight Approx: 574g
1. LED light on keyboard will be turned on constantly when input voltage is below
9V DC, Increase input voltage to 10V DC to solve it.
2. LED light on keyboard will flash constantly once the voltage output to camera
exceeds 14.5V, restart the system to solve it.
3. LED light on keyboard will flash constantly once work power exceeds 2.5A due
to short circuit, restart the system to solve it.
ATTENTION!!
12-24V DC
POWER OUT
Auto time
RCA conn ec tor
AUX IN
POWER OUT
DC 12V 1A
DC 12-24V
POWER IN
DC 12-24V
POWER IN
CAM1 CAM2
CAM2
CAM1
MONITOR REMOCON
NOR
MIR
(MONO)
VIDEO VIDEO
L R L R
(MONO)
AUX IN AUX OUT
AUTO TIME
MAX MIN
RCA conn ec tor
AUX OUT
Four hanesses for
Green:Camera 1
White:Camera 2
Red:12- 24V DC
Black:Ground
12-24V DC
POWER IN
MIR/NOR
setting
(Option)
TFT LCD Monitor
CONTROLLER
POWER
CA1 CA2
AUX
Keyboard
Control box wiring diagram
Tartalomjegyzék
Mindet kibont
Kapcsolódó Kézikönyvek a Snooper különféle RC200